Epoxy Vinyl Ester Resins

Vinyl ester resins are produced by the reaction between an epoxy resin and an unsaturated monocarboxylic acid. One of their major advantages is that they offer better resistance to moisture absorption and hydrolytic attack than polyester. A vinyl ester skin between the gelcoat and the glass/polyester laminate or over the gel-coat, therefore tends to prevent the hydrolysis-induced osmotic blistering that fibreglass boat owners fear. Boat builder or owners retrospectively can incorporate this protection without having to go to the expense of using epoxy; though the latter constitutes an even more effective moisture barrier.

They are based on either bisphenol-A or novolac chemistry with methacrylic acid forming the polymer. Used extensively to produce corrosion resistant tanks, pipe and other components, vinyl ester resins have a higher resistance to corrosive chemicals and environments than regular unsaturated polyesters. For this reason, vinyl ester resins and vinyl ester blended with polyester are also used extensively in the marine industry to produce an effective water resistant barrier for boat hulls and other parts.

Feautures:   Excellent corrosion resistance, very good mechanical strength

Applications:  Chemical storage tanks, corrosion resistant flooring, waste water treatment systems, food storage tanks, yatchs,etc

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Bisphenol A 450±100 #3/60 rpm @25°C 20±5 26% Cobalt: 0.4 phr, 100% DMA:0.05 phr, 55%MEKP:1.2 phr, @25°C

Feautures:   Excellent corrosion resistance, very good mechanical strength

Applications:  Chemical storage tanks, corrosion resistant flooring, waste water treatment systems, food storage tanks, yatchs,etc

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Bisphenol A 500±100 #3/60 rpm @25°C 20±5 26% Cobalt: 0.4 phr, 100% DMA:0.05 phr, 55%MEKP:1.2 phr, @25°C

Feautures:   Excellent corrosion resistance, very good mechanical strength

Applications:  Chemical storage tanks, corrosion resistant flooring, waste water treatment systems, food storage tanks, yatchs,etc

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Bisphenol A 450±100 #3/60 rpm @25°C 25±5 55%MEKP:1.0phr

Feautures:   Excellent corrosion resistance, very good mechanical strength

Applications:  Chemical storage tanks, corrosion resistant flooring, waste water treatment systems, food storage tanks, yatchs,etc

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Bisphenol A 600±100 #3/60 rpm @25°C 25±5 55%MEKP:1.0 phr, @25°C

Feautures:   High solid content, bisphenol A type epoxy vinyl ester resin with low styrene content (37%). It provides excellent corrosion resistance and very good mechanical strength

Applications:  Chemical storage tanks, corrosion resistant flooring, waste water treatment systems, food storage tanks, yatchs,etc

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Bisphenol A 300~500 20~26 6%Co:0.3%, 10%DMA:0.2%, M-50: 1.25%

Feautures:   Superior toughness with excellent fatigue resistance due to high

Applications:  Chemical storage tanks, corrosion resistant flooring, waste water treatment systems, food storage tanks, equipment specified to handle mixture of air, exhaust gases or potentially flammable liquids.

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Novalac 335±65 #3/60 rpm @25°C 20~30 6%Cobalt: 0.4phr, 100% DMA: 0.05phr, 80%CHP: 1.2phr @25oC.
Modification Codes
T Thixotropic (no sagging)   LS Low Shrinkage
A Cobalt preaccelerated   HV High Viscosity
B Blue Indicator   LV Low Viscosity
D Filled   L UV light stabilized
FR Flame retardant   FT Brush or Roller Application
LSE Low Styrene Emission   TT Spray Application
Amine pre-accelerated   Color White or custom color options

Packages
You can choose any package type or you can contact to our sales department for information about container options.