GRP Hand Lay-up Spray-up

Hand Lay-Up

Hand lay-up is the most common and least expensive open-molding method because it requires the least amount of equipment. Fiber reinforcements are placed by hand in a mold and resin is applied with a brush or roller. This process is used to make both large and small items, including boats, storage tanks, tubs and showers.

Spray-Up

Spray-up, or chopping, is an open mold method similar to hand lay-up in its suitability for making boats, tanks, transportation components, and tub/shower units in a large variety of shapes and sizes.

Feautures:   Resilient, thixotropic, low viscosity, pre-accelerated ,fast wet-out of chopped glass stands and easy rolling, high thixotropic index, fast trim and cure times, non-air-inhibited

Applications:  Moulding of glass reinforced parts, using alumina hydrate as an extender and fire retardant

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 250-400 #2/20 rpm @25 °C 15-20 @25 °C 1 mL % 50 MEK-P

Feautures:   Low viscosity, high reactive,fast curing and high filler of calcium carbonate, aluminium hydroxide, marble powder acceptance for casting and low volumetric shrinkage

Applications:  GRP, FRP and clear casting

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 180-200 #2/60 rpm @25 °C 25-30 @25 °C 0.15 mL %6 Co Oct 1 mL % 60 MEK-P

Feautures:   Medium viscosity, medium reactive, medium cure, good fiber wet-out, economical laminating resin

Applications:  GRP, FRP and laminating

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 300-450 #2/20 rpm @25 °C 5-8 @25 °C 0.25 mL %6 Co Oct2 mL % 60 MEK-P

Feautures:   Medium reactive, good fiber wet-out, low shrinkage, high filler acceptance, water resistant

Applications:  GRP, FRP and laminating

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 500-600 #2/20 rpm @25 °C 8-10 @25 °C1 mL % 60 MEK-P

Feautures:   High viscosity, high filler acceptance, excellent wetting for fiber, good heat resistance, easy rolling due to high viscosity

Applications:  GRP, FRP and laminating

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 900-1000 #2/20 rpm @23°C 10-15 @25 °C1 mL % 60 MEK-P

Feautures:   Medium reactive, rigid, very good fiber wetting, chemical, heat and corrosion resistance

Applications:  Boat molds, marine gelcoat backup, chemical tanks

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso Tix 450-650 #2/20 rpm @25 °C 14-25 @25 °C 1.25 mL % 50 MEK-P

Feautures:   Medium rective, rigid, excellent chemical, heat and corrosion resistance, high heat distortion, rapid cure and fast trim time, very good wet time

Applications:  Military applications that require advanced specifications to meet

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso Tix 400-600 #2/20 rpm @25 °C 9-15 @25 °C 1.25 mL % 50 MEK-P

Feautures:   Medium reactive, medium cure, stable gel time, fast curing, excellent fiber wetting

Applications:  Manufacture big size composite parts

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 500-600 #3/20 rpm @25 °C 5-7 @25 °C0.2 mL %6 Co Oct1.25 mL % 50 MEK-P

Feautures:   Medium viscosity, medium reactive resin. Thixotropic property allows application on vertical parts without the risk of sagging or drainage, rapid wetting, good and quick cure

Applications:  Fabrication of FRP marine craft

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 290-340 #3/100 rpm @23°C 18-30 @25 °C1.25 mL % 50 MEK-P

Feautures:   Low styrene emission (LSE), fast cure, low viscosity

Applications:  General purpose laminating

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 200-260 #3/100 rpm @23°C 12-16 @25 °C 1.5 mL % 50 MEK-P

Feautures:   Medium-fast cure, medium viscosity

Applications:  General purpose laminating

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 290-340 #3/100 rpm @23°C 19-21 @25 °C 1.5 mL % 50 MEK-P

Feautures:   Low styrene emission (LSE), excellent fiber wet-out, medium viscosity

Applications:  General purpose laminating

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 320-360 #3/100 rpm @25°C 19-21 @25 °C1.25 mL % 50 MEK-P

Feautures:   Low styrene emission (LSE), good fiber wet-out, medium cure, high filler acceptance, water resistant, low viscosity

Applications:  Calcium carbonate filled lamination

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 170-210 #3/100 rpm @25°C 15-20 @25 °C 0.63 mL % 50 MEK-P

Feautures:   Medium cure, good fiber wet-out and low odour

Applications:  Suitable for indoor applications

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 200-250 #3/100 rpm @23°C 22-25 @25 °C 1.25 mL % 50 MEK-P

Feautures:   Medium cure, high filler acceptance, excellent wetting for fiber, good heat resistance, easy rolling, medium viscosity

Applications:  FRP lamination

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 320-360 #3/100 rpm @25°C 18-25 25 °C 1.25 mL % 50 MEK-P

Feautures:   Medium cure, low shrinkage, low odour, good fiber wet-out, medium viscosity

Applications:  FRP lamination

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 320-360 #3/100 rpm @25°C 18-25 @25 °C 1.25 mL % 50 MEK-P

Feautures:   Low styrene emission (LSE), excellent fiber wet-out

Applications:  Large FRP boat manufacturing

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 320-360 #3/100 rpm @25°C 18-25 @25 °C 1.25 mL % 50 MEK-P

Feautures:   Medium reactive, medium viscosity, easy fiber wet-out, medium-fast cure

Applications:  FRP, GRP and clear casting applications, manufacture big size composite parts

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 450-500 #2/20 rpm @25°C 7-9 @25 °C 0.25 mL %6 Co Oct2 mL % 60 MEK-P

Feautures:   High reactive, medium viscosity, transparent, low volume deformation, easy fiber wet-out

Applications:  Fast trim and serial production of FRP, GRP

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 350-400 #2/20 rpm @25°C 4-7 @25 °C0.25 mL %6 Co Oct2 mL % 60 MEK-P

Feautures:   Low styrene emission (LSE), high heat distortion, excellent fiber wetting and rolling, low odour

Applications:  GRP-FRP products with enhanced mechanical and therma properties

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 450-600 #2/20 rpm @25°C 23-31 1.25 mL % 50 MEK-P @25 °C

Feautures:   Medium viscosity, excellent fiber wet-out, high corrosion resistant

Applications:  GRP-FRP products where high gloss and corrosion resistant are required

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso/NPG Tix 450-750 #2/20 rpm @23°C 25-35 1.25 mL % 50 MEK-P @25 °C

Feautures:   Low viscosity, white colour, high filler acceptance, excellent adhesion to acrylic and ABS sheet, easy fiber wet-out, comparatively light, durable and economical resin.

Applications:  Sanitary production

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 180-220 #3/50 rpm @25°C 1 mL % 60 MEK-P @20 °C

Feautures:   Excellent adhesion to acrylic ABS sheet, easy wetting for fiber, comparatively light, durable

Applications:  Sanitary production

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 2000-3000 #3/20 rpm @25°C 9-11 1.5 mL % 60 MEK-P @25 °C

Feautures:   Low shrinkage (LS), white colour, high filling capacity, excellent adhesion to acrylic and ABS sheet, rapid fiber wetting, UV durable

Applications:  Sanitary production

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 180-220 #3/50 rpm @25°C 8-12 1 g % 60 MEK-P @20 °C

Feautures:   Low shrinkage (LS), medium cure, rigid, high gloss, UV durable, high filler acceptance

Applications:  Sanitary production

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho Tix 100-200 #3/50 rpm @25 °C 14-18 1.25 mL % 50 MEK-P @25 °C

Feautures:   Special DCPD structure, thixotropic, pre-accelerated with blue indicator, low shrinkage, excellent fiber wet-out, low peak exotherm

Applications:  High surface quality composite parts

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
DCPD Tix 350-550 #2/20 rpm @23°C 22-26 2 mL % 50 MEK-P @25 °C

Feautures:   Special DCPD structure, low shrinkage, excellent fiber wet-out, low peak exotherm

Applications:  High surface quality composite parts

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
DCPD Tix 340-450 #2/20 rpm @23°C 18-22 1.25 mL % 50 MEK-P @25 °C
Modification Codes
T Thixotropic (no sagging)   LS Low Shrinkage
A Cobalt preaccelerated   HV High Viscosity
B Blue Indicator   LV Low Viscosity
D Filled   L UV light stabilized
FR Flame retardant   FT Brush or Roller Application
LSE Low Styrene Emission   TT Spray Application
Amine pre-accelerated   Color White or custom color options

Packages
You can choose any package type or you can contact to our sales department for information about container options.