Corrosion Resistant

pipe-type-resin

Designed to give maximum corrosion protection

High performance, corrosion-resistant specialty polyester and vinyl ester resin systems are ideal for the manufacture of tanks, pipes, vessels that contain acids, alkalis, fuels, foodstuffs, water and other materials that can corrode metals. These resins are used where long-term resistance to chemical attack is essential or where operating at elevated temperatures. Corrosion Resistant resins are primarily formulated as isophthalic, terephthalic and vinyl ester resins, but other specialty base resins are also used. Vinyl ester resins are used extensively in boat building to prevent hull blistering.

Feautures:   Rigid, excellent mechanical strength, chemical resistance,

Applications:  High chemical and high heat distortion resistance FRP applications

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso Tix 450-650 #2/20 rpm @25 °C 14-25 @25 °C 1.25 mL % 50 MEK-P

Feautures:   Fast trim time, rapid cure, excellent chemical, heat and corrosion resistance, very good fibe wet-out

Applications:  Hand lay-up/spray-up, spray winding, centifigual casting

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso Tix 400-600 #2/20 rpm @25 °C 9-15 @25 °C 1.25 mL % 50 MEK-P

Feautures:   Resillient, medium reactive, high viscosity, high elongation, high flexural strength, strong chemical resistant, high filler acceptance

Applications:  Base resin for manufacturing gelcoats

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso 850-1050 #2/20 rpm @25 °C 5- 7 5- 7 @25 °C 0.2 mL %6 Co Oct 1 mL % 50 MEK-P

Feautures:   Medium-high reactive, medium viscosity, rigid, provides high elongation high flexural strenght, strong chemical resistant, accepts high filler loads

Applications:  FRP fitting pipes , chemical tanks and marine

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso 700-800 #3/50 rpm @25 °C 4-8 @20 °C 0.2 mL %6 Co Oct 2 mL % 60 MEK-P

Feautures:   High viscosity, thixotropic with blue indicator, pre-accelerated, good thermal and high mechanical properties, consistent gel and cure times

Applications:  Marine vessels and pipes

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso Tix 900-1000 #2/20 rpm @23 °C 25-27 @25 °C 2.5 g % 50 MEK-P

Feautures:   Medium viscosity, medium reactive, excellent chemical and corrosion resistance, good heat and physical properties

Applications:  Automotive sector, water and waste water cleaning facilities, chemical process facilities

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso 400-450 #2/20 rpm @25 °C 15-20 @25 °C 0.25 mL %6 Co Oct 1.25 mL % 50 MEK-P

Feautures:   High reactive, high viscosity, superior fiber wet-out, resistant to moisture, stain and weathering, excellent chemical resistance and colour stability

Applications:  Appliances, electrical, construction and food storage

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso 1000-1200 #3/50 rpm @25 °C 4-8 @20 °C 0.2 mL %6 Co Oct 2 mL 60 MEK-P

Feautures:   Low styrene emission (LSE), rigid, excellent wetting and rolling properties, corrosion resistant, low odour

Applications:  Corrosion resistant FRP

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso/NPG Tix LSE 450-550 #2/20 rpm @25 °C 25-35 @20 °C 1.25 mL % 50 MEK-P

Feautures:   Low styrene emission (LSE), excellent surface quality, high gloss, wetting and easy rolling

Applications:  High performance and high quality finished FRP products

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso/NPG Tix LSE 450-750 #2/20 rpm @25 °C 25-35 @25 °C 1.25 mL % 50 MEK-P

Feautures:   Medium viscosity, medium reactive, good water and chemical resistance, well fiber wet-out

Applications:  Chemical plant and containers, tanks, pipes

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Iso 400-500 #2/20 rpm @25 °C 8-10 @25 °C 2 mL % 50 MEK-P
Modification Codes
T Thixotropic (no sagging)   LS Low Shrinkage
A Cobalt preaccelerated   HV High Viscosity
B Blue Indicator   LV Low Viscosity
D Filled   L UV light stabilized
FR Flame retardant   FT Brush or Roller Application
LSE Low Styrene Emission   TT Spray Application
Amine pre-accelerated   Color White or custom color options

Packages
You can choose any package type or you can contact to our sales department for information about container options.