Mould Gelcoats

mold-making-gelcoats

Designed for making moulds

Polres mould type gelcoats are divided into two categories. First is applied directly inside the mould and second is the gelcoat used for the production of a mould.

Feautures:   Optimal flexibility and stroke resistance, high resistantance to destruction effects of release agents and styrene on the mould surface during production

Applications:  Production of moulds which is used in polyester materials production

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 6000-9000 #5/20 rpm @25 °C 10-15 2 mL % 60 MEK-P, @25 °C

Feautures:   Optimal flexibility and stroke resistance, high resistantance to destruction effects of release agents and styrene on the mould surface during production

Applications:  Production of moulds which is used in polyester materials production

If you are searching for a technical data sheet(TDS) or safety datasheet (SDS) that you cannot find here, please contact us.

Modifications :
Type Viscosity (CPS) Gel(min.) Curing System
Ortho 3000-4000 #5/20 rpm @25 °C 10-15 2 mL % 60 MEK-P, @25 °C
Modification Codes
T Thixotropic (no sagging)   LS Low Shrinkage
A Cobalt preaccelerated   HV High Viscosity
B Blue Indicator   LV Low Viscosity
D Filled   L UV light stabilized
FR Flame retardant   FT Brush or Roller Application
LSE Low Styrene Emission   TT Spray Application
Amine pre-accelerated   Color White or custom color options

Packages
You can choose any package type or you can contact to our sales department for information about container options.